Product-specific sourcing · China
Qi / Qi2 Wireless Charger OEM Sourcing in China
Compare China Qi/Qi2 wireless charger OEM/PL by form factor, Qi/Qi2 profile, watts, WPC ID, FOD/thermal, USB-C PD/PPS input, magnets, multi-device allocation, packaging, MOQ, samples, docs — buyer RFQ fields.
Buyer context
Make the technical and commercial basis comparable first.
Wireless charger quotations often look similar until form factor, Qi / Qi2 profile (BPP, EPP, Qi2 MPP / 25W), peak versus sustained watts, WPC certification and database ID, magnet / MPP alignment, coil architecture, FOD / OTP fields, USB-C PD / PPS input, multi-device load budget, housing / ID tier, private-label scope and MOQ layers are written down. Sephalis helps buyers make those fields explicit so supplier quotations stay comparable, and keeps supplier statements separate from WPC listing, MagSafe licensing or market-access approval. Sephalis does not manufacture wireless chargers and does not certify Qi / Qi2, WPC membership or electrical safety. Use this page for Qi / Qi2 desk or bedside pads, wireless modules and multi-device wireless stations (OEM / private label); for USB / GaN wall bricks use /electronics-sourcing-china/wall-chargers; for portable power banks including MagSafe or wireless power banks use /electronics-sourcing-china/power-banks; for USB / USB-C PD cables alone use /electronics-sourcing-china/usb-cables; for category-level charging scope use /electronics-sourcing-china/power-charging-products. Car 12–24V wireless mounts are out of scope on this page.
What buyers usually need to compare
Use these fields to keep quotations tied to the same technical, production and packaging assumptions.
✓ Form factor (desk pad, bedside stand, foldable travel pad, embedded module, multi-device station)
✓ Qi profile target: BPP, EPP, Qi2 MPP / 25W, or mixed — and who states the profile
✓ Peak watts versus sustained / thermal-limited watts under stated load and duty cycle
✓ WPC certification claim and Wireless Power Consortium database ID for the quoted model (supplier document)
✓ Magnet / MPP alignment scope (none, Qi2 magnetic, or MagSafe-compatible claim) — MagSafe trademark / license as a separate legal decision for the buyer
✓ Coil architecture (single coil, multi-coil, array) and active area / placement notes
✓ FOD (foreign-object detection) and OTP / thermal protection fields requested in the RFQ — not Sephalis guarantees
✓ USB-C PD / PPS input requirement (wattage / PDO targets) and who states support
✓ Multi-device load budget / power allocation when more than one wireless or wired output is used
✓ Housing, colour and industrial-design tier (stock model vs colour/housing vs new mold / full ODM)
✓ Private-label scope (logo method, retail box, inserts, manuals, UPC/EAN if needed)
✓ Destination markets and labeling / marking language expectations
✓ MOQ by SKU and by customisation layer (product vs packaging vs tooling); sample cost and sample lead time
✓ Production lead time, quantity breakpoints, NRE / tooling, and documents to request with the quotation
Evidence worth collecting before the next decision
Sephalis keeps supplier statements, technical evidence and unresolved questions separate so the buyer can see what is known and what still needs engineering or specialist review.
✓ Written wireless / electrical specification matching the RFQ fields (buyer-verified once agreed)
✓ Product photos and dimensioned drawing or active-area note (supplier-provided)
✓ Supplier statement on Qi / Qi2 profile, peak vs sustained watts and magnet / MPP scope (supplier claim)
✓ WPC certificate copy and database ID for the quoted model where claimed (supplier document — not Sephalis certification or listing)
✓ Supplier statement on FOD behaviour and thermal / OTP limits under stated load (supplier claim)
✓ Supplier note on USB-C PD / PPS input rating when claimed (supplier claim)
✓ Packaging or private-label mock-up when branding is in scope (supplier-provided)
✓ Written sample terms, MOQ layers, NRE / tooling and production lead time (commercial)
✓ Unresolved items called out explicitly: WPC report-to-model match, independent lab status, MagSafe trademark / license status (unknown until buyer or specialist closes them)
Commercial comparison
Separate one-time development cost from recurring unit cost.
For electronics, tooling, NRE, programming, test fixtures, artwork and prototype charges may sit outside the production unit price. A useful comparison keeps those charges visible together with MOQ, lead time, packaging and FOB terms.
Technical boundary
Supplier documents are evidence, not automatic approval.
Sephalis can collect specifications, quotations, supplier documents and samples. Formal electrical safety, radio, battery transport, engineering validation, product compliance and market-access decisions remain separate questions for the relevant specialists and authorities.
Common buyer questions
Short answers below describe the sourcing workflow rather than engineering or regulatory approval.
When should I use wireless-chargers vs wall-chargers, power-banks, usb-cables or the charging hub?
Use /electronics-sourcing-china/wireless-chargers for Qi / Qi2 desk or bedside pads, wireless modules and multi-device wireless stations (OEM / private label). Use /electronics-sourcing-china/wall-chargers for USB / GaN wall bricks (ports, PD/PPS, plug market). Use /electronics-sourcing-china/power-banks for portable consumer power banks, including MagSafe or wireless power banks. Use /electronics-sourcing-china/usb-cables when the RFQ is the cable alone. Use /electronics-sourcing-china/power-charging-products for category-level charging scope before opening a leaf. Keep each RFQ on the matching page so suppliers quote the same product scope.
Does Sephalis manufacture or certify Qi / Qi2 wireless chargers?
No. Sephalis is a buyer-side sourcing and supplier-research service. It helps compare manufacturers and collect specifications, quotations, samples and supplier documents. Manufacturing capability claims, WPC membership, Qi / Qi2 listing and any certificates remain with the supplier; formal electrical safety or market-access approval stays with the relevant specialists.
How should WPC database ID and FOD appear in the RFQ?
Ask each supplier to state the Qi / Qi2 profile, peak versus sustained watts, FOD and OTP behaviour, and — when certification is claimed — the WPC database ID and certificate for the exact model quoted. Treat WPC documents as supplier evidence to collect and match to the quoted SKU; Sephalis does not issue WPC IDs or verify listings. If report-to-model match is unclear, mark that item unknown until the buyer or a specialist closes it.
Can suppliers market MagSafe on a wireless charger RFQ?
MagSafe is an Apple trademark; using MagSafe branding or claiming MagSafe compatibility is a buyer legal and licensing decision, not something Sephalis approves. Prefer stating Qi2 / MPP magnetic alignment targets in the RFQ when that is the technical need, and keep any MagSafe trademark or license path as a separate buyer decision with counsel. Sephalis records supplier magnet / MPP statements as commercial evidence only.
How should MOQ, private label and OEM tiers be compared?
Ask each supplier to separate logo/label-only, colour/housing and full custom/mold paths, and to split product MOQ from packaging or tooling MOQ. Record sample cost, sample lead time and NRE lines separately. A low MOQ claim is not comparable until those lines and lead times are written down.
Are car wireless chargers or wireless power banks in scope on this page?
No. This page covers Qi / Qi2 desk or bedside pads, modules and multi-device wireless stations. Portable power banks with an integrated wireless pad or MagSafe-style power bank belong on /electronics-sourcing-china/power-banks. For wired 12–24V cigarette-lighter / hardwire USB-A/C PD car chargers use /electronics-sourcing-china/car-chargers. Qi wireless car mounts and in-vehicle wireless chargers remain out of scope here (future leaf or separate brief). Keep the RFQ on the matching product so quotations stay comparable.
Need a wider electronics supplier search?
Browse the full cluster for consumer electronics, accessories, chargers, PCB assembly, low-MOQ manufacturing, OEM/ODM, private label, second sourcing and supplier verification.
Browse Electronics Sourcing in China →